The method of cleaning the stockbreeding fan

The methods of cleaning the livestock fan have the following points

Animal husbandry fan is the use of water circulation cooling air temperature. There is a lot of dust in the air. For a long time, we should regularly clean the filter net of animal husbandry fan.

1, disconnect the main power source of animal husbandry fan (disassemble control panel, so as to avoid anyone misleading to start up, causing danger).

2, screw down the screws on the filter line, lift up the filter net, and then pull the filter part out, and then remove the filter screen.

3, carefully dismantle the eight filter net (or wet curtain), soak and rinse with clean water (no chemical material, so as not to corrode wet curtain and filter net, water pressure should not be too high. "

Lest the filter screen and the wet curtain are washed out.

4, use plastic bag to catch animal fan, connect water to spray pipe and cleaning port, and rinse the spray pipe with clean water.

5, clean the bottom basin of livestock fan with clean water.

6, eight pieces of filter screen (or wet curtain) will be reinstalled into the animal husbandry fan.

7, reconnect the main power of the animal blower and do other operations in 5 minutes.

Note: high altitude operation must be fastened to safety belt and do safety work well.